Draft System How To Videos
Easy To Follow Instructions and Videos
FOB INSTRUCTIONS
Disconnect the keg coupler from the empty keg and connect to a full keg in the usual manner. Then follow these 3 simple steps:
VENTING
Push vent button. Wait a few seconds for foam to settle and vent again, ensuring the chamber is generally full of beer.
TWIST UP
Twist the knob counterclockwise until it stops! Float will rise to top of the chamber.
LOCK DOWN
Twist the knob clockwise fully until it stops. That’s it! You are now ready to pour beer!
CLEANING (Authorized Personnel Only)
When flushing lines, twist knob counterclockwise, until it stops in the twist up positions (#2). Operate the vent button a few times while flush cleaning to ensure the vent will not “stick” in an open position during regular use.
Troubleshooting
1 - GAS/FOAM ESCAPING FROM THE TAP WHEN KEG EMPTIES. Check knob is in the position #3 Lock Down.
2 - UNIT SHUTS DOWN WHEN THERE IS STILL BEER IN THE KEG.
Follow procedures 1, 2, and 3 - If unit continues to shut down, CO2 breakout may be occurring (gas is escaping from the beer and collecting in the clear chamber.) Have your draft system checked and also check for a leaking keg coupler seal.
3 - OTHER To bypass unit due to unexplainable trouble:
Twist up in position #2 - you can now continue to serve beer in the usual manner. Call your product salesperson or local draft technician during regular hours for complete service.
